Reducing noise with customized acoustic soundproofing foam, panels, coatings, mountings, materials vs.
We design, develop, and supply soundproofing materials and solutions for architectural acoustics, building and construction, power generation, marine, transport, defense, and many other applications.
We know noise and vibration, we keep it quiet.
High quality and optimal performance are part of our standard which results in optimal performance with as less noise and vibration as possible We deliver fixed pitch propellers, folding propellers and feathering propellers.
For applications like the suspension of deckhouses, accommodation rooms, and control cabins, this mounting is an excellent isolator against structure-borne vibration and noise, passive isolation.
The rubber bellows are produced with a vulcanized steel ring to guarantee a perfect sealing of the profiled sealing rings in the special chamber of the swivel flanges.
Developed by our design team to allow exhaust gasses pipe works pass trough bulkheads and decks without transmitting vibration noise or heat to the surrounding ship-structure.
The Rubber Design Compact Thrust Block CTB is an addition to the existing thrust bearing range. The CTB has been developed for compact dimensions in combination with our SMART-LINK coupling.
- Cork core/rubber (650 kg/m³)
- Excellent airborne noise reduction
- Low vibration radiation
- With gaboon top layer
Due to its natural warm appearance, Teak is one of the most beautiful types of wood in the world,
perhaps the most beautiful! However Teak from Asia is not undisputed and currently there are a lot of
limits for importing into the EU.
Due to its natural warm appearance, Teak is one of the most beautiful types of wood in the world, perhaps the most beautiful! However Teak from Asia is not undisputed and currently there are a lot of
limits for importing into the EU.
Properties Cabin Sole DS:
- The use of real veneer creates a luxurious atmosphere.
- Exterior quality
Standard sizes:
- 250 x 125 cm or 305 x 125 cm;
Our SANDWICH PANELS ALU HONEYCOMB are used in motor and sailing yachts, buses and coaches, houses, offices,theatres and furniture.
Besides HPL we bond LDF (paper), a foil serving as a base coat for the actual finish. LDF ensures an even and smooth coating and limits paint consumption.
LDF-C has a finish coating and can be processed immediately.
Our SANDWICH PANELS FOAM are used in motor and sailing yachts, buses and coaches, houses, offices, theatres and furniture.
Our SANDWICH PANELS HONICELL are used in motor- and sailing yachts, busses and coaches, houses, offices, theatres and furniture
Our SANDWICH PANELS PET FOAM are used in motor- and sailing yachts and furniture.
SANDWICH PANELS PP are used in motor and sailing yachts, buses and coaches, houses, offices, theatres and furniture
Beuken
Dikte: 0,6 / 1,4mm
Structuur: Dosse /
Quartiers;
Beech
Thickness: 0,6 / 1,4mm
Structure: Crown /
Quartercut;
The MecLev® is an adjustable and re-usable steel mounting chock, that can be used for mounting all types of rotating or critically aligned machinery.
The MecLev® is an adjustable and re-usable steel mounting chock, that can be used for mounting all types of rotating or critically aligned machinery.
Our lightweight sandwich panels are used for constructional purposes. Please contact us to assist you in making the right choice or discuss specifics.
Our range of Sonopanels includes sandwich panels intended for acoustic insulation and anti-drumming .
SeaRox SL 320 is a semi-rigid slab made of stone wool. The product can be supplied with reinforced alu foil or glass cloth.
The slab (board) is suitable for fire-rated A-class steel constructions where low weight plays an important role, such as onboard passenger ships, naval ships, and offshore supply vessels.
Suitable for all final finishes on concrete floors.
Highest and perfect adhesive power, also on rough and oily surfaces. Permanent high resilience and long-term results
Aluminum coated surface, intermediate material Glass cloth 100 gr/m2 85 degree heat resistance dry temperature, when exposed to flame, the reaction time varies according to the intensity of the flame
The multi purpose anti-vibration mounts (MP mountings) are designed for active isolation of vibrations. They can be used for various applications such as generator sets, pumps, compressors, cabins, containers etc.
As vibration and noise insulators these anti-vibration mounts are suitable for a variety of vibration producing machinery (active insulation).
The range of standard spring isolators allow up to 25 mm static deflection and are specially designed for land based installations with high vibration isolation.
The AxiSeal is applied in water-lubricated propeller shaft systems. We will be delighted to give its recommendations about the conversion of a grease-lubricated system into a water-lubricated one.
The originally designed for gearboxes and close coupled engines/gearboxes, the mount arrangements are particularly versatile and can be used for many other applications.
Our rubber bellows red ring are made from EPDM rubber and provide resistance to water upto 90°C, however this is influenced by the working pressure.
The hanging fixed points support the exhaust system and control the dynamic forces which occur in the system while the vessel is in operation.
Rubber Design has the in-house skills and expertise necessary to perform a complete dynamic analysis of a vessels propulsion system in order to select the correct coupling and engine mountings for each application.
- Cork core/rubber (965 kg/m³)
- Excellent airborne noise reduction
- Low vibration radiation
- With gaboon top layer
Properties Cabin Sole LS:
- The use of real veneer creates a luxurious atmosphere.
- Exterior quality
Standard sizes:
- 250 x 125 cm or 305 x 125 cm;
Our SANDWICH PANELS BALSA are used in motor- and sailing yachts and furniture.
EasyTurn rubber bearings have an optimized flute design for maximum hydrodynamic-wedge performance; creating the best possible water film between the rubber and shaft surface.
The originally designed for gearboxes and close coupled engines/gearboxes, the mount arrangements are particularly versatile and can be used for many other applications.
There are two basic types of expansion bellows singles and doubles, and their purpose is to absorb the movement in any pipework run that is mounted between two fixed points.
Heat reducing bulkhead penetrations are especially designed to lead the exhaust gas pipe watertight through bulkheads or decks.
Rubber Design has developed a compact range of thrust blocks in combination with their ERD Marine Couplings for high performance operation in yachts and ships.
- Cork/rubber core (680 kg/m³)
- Excellent airborne noise reduction
- Low vibration radiation
- With gaboon top layer
Properties Cabin Sole RS:
- The use of real veneer creates a luxurious atmosphere.
- Exterior quality
Standard sizes:
- 250 x 125 cm or 305 x 125 cm;
We supply complete propulsion systems from the gearbox output flange to the propeller and rudder system. High quality boat propellers and different ways to connect the propeller shaft with the engine gearbox, complete our systems.
For land-based / stationary applications, sandwich mountings can be placed horizontally underneath the generator set, in order to provide a resiliently mounted system.
Rubber Design has developed a unique type of watertight exhaust pipe penetration. This system is certified to handle a pressure up to 0,6 bar (6m) for 30 minutes.
- Cork rubber core (965 kg/m³)
- Excellent airborne sound insulation value
- Low radiation
- With okoume outer layer
Properties HPL Flooring Panel:
- HPL decorative lines also available with a 0.7 mm top layer
- Dimensioning: 305.0 x 130.0 cm
- Height: 0.7 mm
- Border distance: 45 mm
By ensuring a clean and flush underwater hull shape when the engine is not in use, the RPS eliminates propeller drag, therefore, enabling higher speeds, acceleration, and enhanced maneuverability.
The TT (Thrust Torque) mounts are especially developed for the high powered / low weight, close coupled engine / gearbox combinations.
- Core of heavy plastic mass mat (2,400 kg/m³)
- Excellent air and impact sound insulation value (also in lower frequencies)
- Reasonably low radiation
- With okoumé outer layer
A rudder system consists out of a Rudder tube and corresponding Rudder shaft. BNF Rudder systems are custom designed to suit your vessel and requirements.
- Core of cork (212 kg/m³)
- Lightweight
- With okoumé outer layer
- Excellent airborne sound insulation value
- Core of PU-bound recycled rubber (650 kg/m³)
- Excellent airborne sound insulation value
- Low radiation
- With okoume outer layer
- Core of flexible IBL (2,000 kg/m³)
- Excellent air and impact sound insulation value (also in lower frequencies)
- Particularly low radiation (damping effect)
- With okoume outer layer
